Alongside DC rectifiers and regulated power supplies, MicronX designs built-in modules and pulsed-current generators.
A regulated DC power supply stripped back to the essentials, designed to disappear into your electrical cabinet: minimum volume and weight for maximum power, in vertical or horizontal mounting.
Where direct current reaches its limits, pulsed current takes over: instead of a constant current, the generator delivers pulses separated by rest periods, adjustable cycle by cycle.
Regulated DC laboratory power supply — switch-mode technology, PWM voltage & current regulation. Output up to 0–600 V / 0–100 A (1000 W max).
| Parameter | Valeur |
|---|---|
| Output | 1000 W |
| Voltage | 0 to 600 V |
| Current | 0 to 100 A |
| Operating mode | CC-CV |
| Residual ripple | < 0,5 % du calibre nominal |
| Accuracy (voltage & current) | < 0,2 % du calibre nominal |
| Stability | < 0,2 % du calibre nominal |
| Linearity | < 0,2 % du calibre nominal |
| Distortion | < 0,5 % |
| Output voltage | Max current |
|---|---|
| 0 – 10 V | 0 – 100 A |
| 0 – 20 V | 0 – 50 A |
| 0 – 30 V | 0 – 35 A |
| 0 – 40 V | 0 – 25 A |
| 0 – 60 V | 0 – 16 A |
| 0 – 80 V | 0 – 12 A |
| 0 – 100 V | 0 – 10 A |
| 0 – 300 V | 0 – 3 A |
| 0 – 600 V | 0 – 1,6 A |
| Parameter | Valeur |
|---|---|
| Voltage | 230 Vac single-phase (+10 % / −15 %) |
| Frequency | 47 / 63 Hz |
| Power factor | > 0,95 |
| Parameter | Valeur |
|---|---|
| Temperature | 0 to +40 °C (55 °C with derating) |
| Relative humidity | 85 % non-condensing |
| Cooling | Controlled forced air |
| Dielectric strength | 1500 Vrms |
| Poids | 2,5 kg |
Ref. 1307 / MX MOD 1.0 — non-contractual document, subject to change without notice.
Describe your application: we will work out the most relevant solution, from an adapted standard product to fully bespoke equipment.
Specific voltage, current and regulation configurations for unusual processes.
Modernisation and upgrading of existing equipment, electronics and parts.
Equipment designed to fit into your production line and your automation system.
Control, supervision and communication interfaces matched to your needs.
Systems dedicated to testing, measurement and qualification.
Studies and developments to order, from specification to commissioning.
The operator interface of MicronX rectifiers: an industrial Panel PC that replaces knobs and paper logbooks with profiles, curves and an exportable history.
The Touchscreen Panel mounts on the front of the rectifier, in a remote enclosure or in a cabinet. It coexists with PLC control: the operator keeps local control while the supervision system stays master remotely.
| Parameter | Valeur |
|---|---|
| Type | Industrial Panel PC |
| Display | 5.7" TFT LCD — 1024 × 600 |
| Colours | 262,000 |
| Connectivity | Ethernet port — USB port |
| Memory | 1 Go DDR2 |
| Power draw | Low power draw |
| Housing | Aluminium, IP65 protection rating |
Data taken from MicronX documentation — non-contractual, subject to change without notice.
Manual, analogue or digital: the control mode is chosen when ordering and several can be combined on the same unit.
Configure this product to match your process: control, metering and specific options. Three families of options, which can be combined to suit your application.
Reverses the direction of the current in the circuit — a real asset when starting up your bath.
Optimal accuracy across two orders of magnitude, to cope with varying currents.
Regulation measured at the load terminals: compensates for the voltage drop in the power cables.
Voltage or current ramp-up, plus a cycle timer for controlled start-ups.
Dual-output rectifier: balanced current sharing from a single setpoint, with simplified wiring.
Our experts study your application and propose the most suitable solution, from an adapted standard range to fully bespoke equipment.